How to Install a Mobile Phone Signal Blocker?

Posted on 8th Jul 2022 @ 9:44 AM

Many users buy mobile phone signal jammer found that the device is good, but the use of poor results. According to one electronic technology survey, most of people have used the equipment, which is also the main reason for poor performance. It is not the product quality problem. Most of the reason is that we don’t know how to use and install it reasonably.

Today we want to tell you: what clues about mobile phone signal Jammer installation and use we should pay attention to? Firstly, the installation height of shield machine should be no less than 1.8 meters above the ground. When the installation location is less than 200 meters from the base station, the shielding effect is inversely proportional to the distance from the base station. In other words, the closer the base station, the smaller the shielding radius. Secondly, tighten up the antenna, and then turn it back on. The antenna must be kept vertical (Alto). The numbers marked on the antenna are the same as those marked on the antenna holes on the mainframe. The effective coverage of the signal shield is a circular area with the shield as the center. The correct selection of the position of the shield should be paid attention to when using the shield to avoid the blind corner. Shield should be placed in a well-ventilated place, as far as possible to avoid open objects shield, avoid strong electromagnetic source of heat source, to ensure the shielding effect. When the signal blocker or mobile phones signal jammer is not in use, should be timely cut off the power supply, so as not to affect the normal use of mobile phones. When using the waterproof cover in the open air, pay attention to the waterproof. When the area used in the field is larger than the effective shielding range, it is recommended to use a multi-shielded cellular installation to ensure the shielding effect, because the power supply and antenna are dedicated to the host and are one-to-one during factory commissioning, try not to use them interchangeably to ensure the best results. Please stay away from corrosive gases and liquids, and do a good dust and moisture treatment, so as not to accelerate the aging of the internal parts of the equipment. Need to know more information about mobile phone signal blocker? Welcome here www.jammerinthebox.com you will have right to know more.